Home

How to fix error code 1302p 1300p 2002g

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

Error code 1302p 1300p 2002g is an error code that indicates a problem with the printer's print head. The print head is the part of the printer that actually prints the ink onto the paper. This error code can be caused by a variety of things, but the most common cause is a clogged print head. When the print head becomes clogged, it can't print properly, and this can cause the printer to produce error codes. There are a few ways to clean a clogged print head, but the best way is to use a print head cleaning kit. These kits usually come with a set of instructions, and they can be found at most office supply stores.

Users typically search for a solution by asking about:

  • battlefield 2042 error code 1004g
  • battlefield 2042 error code 1302p 1300p 2002g
  • error code 1302p 1300p 2002g

1. Restart your computer and try again

  1. Shut down your computer and wait 5 seconds
  2. Turn on your computer and immediately press F8 to enter the startup menu
  3. Choose your operating system and press Enter
  4. Choose Safe Mode with Networking and press Enter
  5. Choose your computer from the list of devices and press Enter
  6. Choose Troubleshoot and press Enter
  7. Choose Advanced Options and press Enter
  8. Choose Startup Settings and press Enter
  9. Choose Restart and press Enter
  10. Choose OK and press Enter

2. Update your drivers

  1. Right-click on the device icon representing the hardware you wish to update and select "Manage".
  2. If the hardware is not already listed in the "Manage" window, click on the "Add" button.
  3. In the "Manage" window, click on the "Driver" tab.
  4. Click on the "Update Driver" button.
  5. Browse to the driver files you wish to install and click on the "Browse" button.
  6. Locate the driver files and click on the "Install" button.
  7. Click on the "Close" button once the driver installation is complete.

3. Try a different USB port

To try a different USB port, follow these steps:

  1. Unplug all other USB devices from your computer.
  2. If you are using a Windows computer, open the "Device Manager" by pressing the "Windows" key and "R" key at the same time, and then clicking on "Device Manager."
  3. If you are using a Mac computer, open the "System Preferences" by pressing the "Apple" key and "command" key at the same time, and then clicking on "System Preferences."
  4. In the "Device Manager" or "System Preferences" window, locate the "USB Controller" or "USB Ports" section, and then double-click on the "USB Controller" or "USB Ports" item.
  5. If you are using a Windows computer, under the "Controller Type" column, click on "COMx" and then under the "Device Status" column, click on "Port Status."
  6. If you are using a Mac computer, under the "Controller Type" column, click on "USB" and then under the "Device Status" column, click on "Port Status."
  7. If the "Port Status" column shows that the USB port is working properly, try plugging in a different USB device. If the "Port Status" column shows that the USB port is not working properly, try using a different USB cable.

4. Try a different USB cable

The steps to Try a different USB cable in order to fix error code 1302p 1300p 2002g are as follows:

  1. Remove any devices plugged into the USB port that are not necessary for the repair.
  2. Inspect the USB cable that is being used to connect the device to the computer. Make sure that the cable is properly plugged into the USB port and the device.
  3. If the USB cable is not the problem, then the device itself may be the problem. Try reinstalling the driver for the device. If the device is a printer, try printing a test page to see if the problem is with the printer. If the problem is with the device, then the device may need to be replaced.

Still not working? maybe try one of these options:

  1. Try a different computer.
  2. Contact the manufacturer of your printer for troubleshooting assistance.