Memory management error Windows 10

Memory management error Windows 10 occurs when the system memory malfunctions.

Staff Asked on September 13, 2017 in Microsoft Windows.
Add Comment
3 Solution(s)

Solution 1.  Windows Memory Diagnostic

Memory management error Windows 10 may occur when your memory/RAM is faulty or is not seated properly in the RAM slot. You may want to reseat your RAM into the RAM slot, then test your RAM for any damage. You may use Memory diagnostic a tool provided by Windows to test your RAM, please see below. This tool is only applicable if you could still access Windows desktop. Test RAM using Windows Memory Diagnostic. Please see below for the instruction.

NOTE: If you could not access Windows desktop due Memory management error accompanied by a blue screen of death (BSOD) restart, you may want to check solution 2.

  1. Press “Windows key + R”. The Run window will appear.
  2. Type “mdsched.exe” and hit enter.

    RE: Memory management error Windows 10

  3. Once a window appears, click “Restart now and check for problems.” NOTE: Computer will undergo reboot and the Windows Memory Diagnostics tool will appear. Leave the Computer to perform diagnosis until it re-boots and returns to Windows Desktop.
  4. Then right click the Windows start button and click “Event Viewer.”
  5. In the Event Viewer window, click “Windows Logs” then “System.” At the right side click “find” then type in “Memory Diagnostic” and click “Find Next.”  If an error is encountered, RAM under warranty can be replaced by the supplier. However, if RAM is out of warranty you need to consider buying a new one. 

    RE: Memory management error Windows 10

Staff Answered on September 13, 2017.
Add Comment

Solution 2. Test RAM using Memtest86

This solution is applicable even if you could not access Windows desktop. However, you are required a working PC to create a bootable Memtest86. If you do not have any spare PC to use, please use solution 3.

Test RAM using Memtest86. Please see below for the instruction.

  1. Download Memtest86. Please see link http://www.memtest86.com/
  2. Create a bootable USB using the ISO image of MemTest86 or burn to a CD or DVD. A bundled software is included to create a bootable CD or USB.
  3. After you have created a bootable Memtest86, restart your computer and boot it to the USB or Disc drive.
  4. The Memtest86 will automatically test your RAM. If an error occurs, it will be in a red font. If memory is defective, consider it for a warranty claim or replacement.

    RE: Memory management error Windows 10

Staff Answered on September 13, 2017.
Add Comment

Solution 3. Check Hardware

If you do not have or unable to create a bootable Memtest86 and you cannot access Windows desktop.

The first thing to do is to turn off the computer and unplug the computer from the power source. Then open the case remove all RAM stick, clean the RAM gold pin using an eraser, and detach graphics card. Return the RAM, make sure that you push it down enough that the retention lever or the RAM slot lock snap. Test the PC after. If the error persists please see below.

    • Unit with one RAM stick

 Move the RAM stick to another RAM slot on your motherboard.

If the error occurred only on a specific RAM slot, the motherboard RAM slot is defective. If your motherboard still has a warranty, please claim it. If the warranty is null, please use working RAM slot.

If the error follows the RAM using other RAM slots, the RAM is defective. If your RAM still has a warranty, please claim it. If the warranty is null, please buy a new one.

    • Unit with multiple RAM stick

 If you have installed a new RAM stick and you encountered the error, it might be the source of the error. Remove it and test your Windows.

If you have a multiple RAM, try to determine which one is causing the problem by using the RAM one by one and using only one motherboard RAM slot. If one of the RAM enables you to access Windows Desktop please create a bootable Memtest86 or use Windows Memory Diagnostic to test your RAM. If the RAM passes the test please test another one. If one of the RAM encounters an error while the other pass, please claim warranty. If the warranty is null, please buy a new one or use only the working RAM.

If all of them fail using a same motherboard RAM slot, it is possible that the RAM slot is defective. If all of them pass using Memtest86 or Windows Memory Diagnostic by using the same RAM slot, it is possible that one of the RAM slots is defective. Use the other RAM slot to confirm.

Staff Answered on September 13, 2017.
Add Comment

Your Solution

By posting your solution, you agree to the privacy policy and terms of service.