How to fix Canon error codes?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

A canon error code is an error that occurs when you try to use a canon printer with a computer that is not compatible with it. This can happen for a number of reasons, but the most common one is that the computer is not able to communicate with the printer. This can be because the printer is not connected to the computer, or because the computer does not have the right drivers installed.

If you get a canon error code, it is important to try to figure out what the problem is so that you can fix it. Sometimes, you can simply uninstall the printer and then reinstall it. This will usually fix the problem. If this does not work, you may need to contact canon support to see if they can help you.

Users typically search for a solution by asking about:

  • canon error code
  • canon error code 801
  • canon error codes

If the answers above didn't work then you should also try:

  1. -Contact Canon customer support
  2. -Check for any firmware updates and install them
  3. -Reset the camera to its factory default settings
  4. -Format the memory card
  5. -Replace the memory card
  6. -Check the lens for any dirt or debris and clean it off
  7. -Check the camera body for any dirt or debris and clean it off
  8. -Make sure that the lens is properly attached to the camera body
  9. -Check the battery and make sure it is fully charged