How do I fix the error 0x80041010?

0x80041010 is an error code that indicates that an attempt to access a COM component on a remote machine has failed. This is usually due to the fact that the COM component is not registered on the machine, or the component's server is not running.

People like you are also looking for:

• ccmsetup failed with error code 0x80041010
• 0x80041010

• Try running the program as an administrator
• Check if the program is compatible with your version of Windows
• Update your Windows operating system

1. Try running the program as an administrator

1.Open the program and click on the "Start" button. 2.Type "cmd" into the search bar and press enter. 3.Type "powercfg /a" and press enter. 4.Type "net start msiserver" and press enter. 5.Type "net stop msiserver" and press enter. 6.Type "net start msiserver /force" and press enter. 7.Type "net stop msiserver" and press enter. 8.Reboot your computer.

2. Check if the program is compatible with your version of Windows

1. Open the "Command Prompt" as administrator.
2. Type "ver" and hit Enter.
3. Type "winver" and hit Enter.
4. If the program is not compatible with your version of Windows, you will receive an error message. Fix the program by following the instructions provided.

3. Update your Windows operating system

1. Boot your computer into Safe Mode with Networking.
2. Click on Start, type "cmd" and press Enter.
3. Type "net start cmc" and press Enter.
4. Type "net stop cmc" and press Enter.
5. Type "net start mscmsvc" and press Enter.
6. Type "net stop mscmsvc" and press Enter.
7. Type "net start wuauserv" and press Enter.
8. Type "net stop wuauserv" and press Enter.
9. Type "net start spoolsvcs" and press Enter.
10. Type "net stop spoolsvcs" and press Enter.
11. Type "net start winmgmt" and press Enter.
12. Type "net stop winmgmt" and press Enter.
13. Type "net start eventlog" and press Enter.
14. Type "net stop eventlog" and press Enter.
15. Type "net start smbd" and press Enter.
16. Type "net stop smbd" and press Enter.
17. Type "net start dns" and press Enter.
18. Type "net stop dns" and press Enter.
19. Type "net start w3svc" and press Enter.
20. Type "net stop w3svc" and press Enter.
21. Type "net start winsrv" and press Enter.
22. Type "net stop winsrv" and press Enter.
23. Type "net start secsvc" and press Enter.
24. Type "net stop secsvc" and press Enter.
25. Type "net start eventlog" and press Enter.
26. Type "net stop eventlog" and press Enter.
27. Reboot your computer.

If you didn't find success with an option above, then try:

1. Reinstall the program.
2. Run a virus scan.
3. Reset your computer.