Home

How to fix arctic cat error code chart?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

The Arctic Cat error code chart is a guide that helps owners and technicians troubleshoot the various error codes that may be displayed on the control panel of their Arctic Cat snowmobiles. The error codes can indicate a variety of different issues, ranging from simple maintenance problems to more serious engine or electrical issues. By referring to the chart, owners and technicians can quickly identify the root cause of the error code and take the necessary steps to resolve the issue.

One of the most common error codes that is displayed on the Arctic Cat control panel is code 12. This code typically indicates that the engine is not receiving enough oil. This can be caused by a variety of different factors, such as a dirty oil filter or low oil level. If the code 12 error is displayed, it is important to check the oil level and replace the oil filter if necessary.

Another common error code that is displayed on the Arctic Cat control panel is code 34. This code typically indicates that the snowmobile's track is not properly aligned. This can be caused by a variety of different factors, such as a bent spindle or damaged track. If the code 34 error is displayed, it is important to inspect the track and make the necessary adjustments.

The Arctic Cat error code chart is a valuable tool that can help owners and technicians troubleshoot a variety of different error codes. By referring to the chart, owners and technicians can quickly identify the root cause of the error code and take the necessary steps to resolve the issue.

1. Restart the vehicle

  1. Ensure all of the vehicle's gauges and warning lights are inoperable, then turn off the ignition.
  2. Remove the key from the ignition.
  3. Disconnect the battery cables.
  4. Remove the front wheel.
  5. Remove the front suspension.
  6. Remove the rear suspension.
  7. Remove the engine cover.
  8. Remove the engine.
  9. Remove the Transmission.
  10. Remove the Rear differential.
  11. Remove the Front differential.
  12. Remove the Front suspension.
  13. Remove the Rear suspension.
  14. Remove the engine cover.
  15. Remove the engine.
  16. Remove the Transmission.
  17. Remove the Rear differential.
  18. Remove the Key from the ignition.
  19. Reconnect the battery cables.
  20. Reconnect the front wheel.
  21. Reconnect the front suspension.
  22. Reconnect the rear suspension.
  23. Reconnect the engine cover.
  24. Reconnect the engine.
  25. Reconnect the Transmission.
  26. Reconnect the Rear differential.
  27. Start the engine and drive the vehicle.

2. Check the engine oil level and fill if necessary

  1. Verify the engine oil level is correct using the dipstick and the oil pressure gauge.
  2. If the oil level is correct, fill the engine with the correct grade of oil.
  3. Replace the oil filter.
  4. Check the air cleaner and replace if necessary.
  5. Check the spark plugs and replace if necessary.
  6. Check the throttle body and adjust as necessary.
  7. Check the fuel filters and replace as necessary.
  8. Verify all hoses and connectors are tight and in proper locations.

3. Check the coolant level and add coolant if necessary

  1. Check the coolant level.
  2. If the coolant level is low, add coolant until the coolant level is at the correct level.
  3. Replace the coolant level sensor if the coolant level is not reading correctly.

Still not working? maybe try one of these options:

  1. Check the air filter and clean or replace if necessary.
  2. Check for loose wires and tighten if necessary.
  3. Check for leaks in the fuel system and repair if necessary.
  4. Check for clogged or damaged catalytic converter and repair or replace if necessary.
  5. Bring the vehicle to a certified Arctic Cat dealer for further diagnosis and service.