Home > e1 f9 whirlpool washer

How do I fix my e1 f9 Whirlpool washing machine?

Published on April 11th, 2022

The e1 f9 whirlpool washer is an error code that is typically caused by a problem with the water inlet valve. This error code can also be caused by a problem with the water pressure switch or a clogged drain line.

You are here because you have a question about:

  • how to fix e1 f9 error code on washer
  • e1 f9 whirlpool washer

1. The first option is to check the washer's manual to see if there is a specific code for this error

There is not a specific code for this error, but the steps for fixing it vary depending on the model of washer. In general, you will need to remove the cover of the washer and locate the motor. If the motor is not damaged, you can usually replace it with a new one. If the motor is damaged, you will need to replace the entire washer.

2. If there is no specific code for the error, try unplugging the washer and then plugging it back in

If there is no specific code for the error, try unplugging the washer and then plugging it back in in order to fix e1 f9 whirlpool washer error.

3. If the error persists, try running the washer through a cycle with no clothes in it

If the error persists, try running the washer through a cycle with no clothes in it.

4. If the error still persists, it may be necessary to call a repair technician to diagnose and fix the problem

  1. Check to see if the washer is plugged in and turned on. If it isn't, turn it on and try to start the spin cycle again.
  2. If the washer still doesn't start, unplug it and check to see if any of the wires are loose or damaged. If so, replace them.
  3. Try to reset the washer by pressing and holding the "RESET" button for five seconds.
  4. If all of the above still don't work, it may be necessary to call a repair technician to diagnose and fix the problem.