How to fix the error code 0xc004f213?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

Error code 0xc004f213 is a Windows error code that indicates a problem with your product key. There are a few reasons why this error might occur:

-The product key you're using is invalid or has been blocked by Microsoft.

-The product key has already been used on another PC.

-The product key has been entered incorrectly.

If you're seeing this error, it's important to check that the product key you're using is valid. You can do this by visiting the Microsoft Store website and entering the product key into the "Check Product Key" tool. If the product key is valid, you'll need to contact Microsoft support to resolve the issue.

You are here because you have a question about:

  • windows error code 0xc004f213
  • error code 0xc004f213

1. Restart your computer and then try activating Windows again

  1. Shut down your computer.
  2. Remove the battery and AC adapter from your computer.
  3. Wait 10 seconds and then reinsert the battery and AC adapter.
  4. Boot your computer from the Windows installation media.
  5. Select Repair your computer.
  6. Click Next.
  7. Click Troubleshoot.
  8. Click Advanced options.
  9. Click Startup Settings.
  10. Click Restart.
  11. Click Troubleshoot.
  12. Click Advanced options.
  13. Click Startup Settings.
  14. Click Restart.
  15. Click OK.
  16. When your computer reboots, press F5 to boot into Windows.
  17. If Windows starts, press R to open the Recovery Console.
  18. Type cd restore and press Enter.
  19. Type dir and press Enter.
  20. Type cd windows and press Enter.
  21. Type xcopy /d C:\windows\system32\config\software and press Enter.
  22. Type xcopy /d C:\windows\system32\config\system and press Enter.
  23. Type xcopy /d C:\windows\system32\config\system32 and press Enter.
  24. Type xcopy /d C:\windows\system32\config\users and press Enter.
  25. Type xcopy /d C:\windows\system32\config\machine and press Enter.
  26. Type xcopy /d C:\windows\system32\config\DefaultDomain and press Enter.
  27. Type xcopy /d C:\windows\system32\config\SAM and press Enter.
  28. Type xcopy /d C:\windows\system32\config\SECURITY and press Enter.
  29. Type xcopy /d C:\windows\system32\config\system and press Enter.
  30. Type restorehealth and press Enter.
  31. Type exit and press Enter. After you have copied the files, restart your computer.

2. Contact Microsoft Support

  1. Launch Microsoft Windows 10 and click on the Start button.
  2. Type “support.microsoft.com” in the Start search bar and hit the Enter key.
  3. On the Microsoft Support page, click on “Contact Microsoft”.
  4. Enter your product key and click on “Next”.
  5. On the “Contact Microsoft” page, enter your issue and click on “Next”.
  6. On the “Additional Information” page, enter the error code and click on “Next”.
  7. On the “Support Response” page, click on “Submit”.
  8. Microsoft Support will contact you within 24 hours.

Some users might also have success with the following opitons:

  1. Use the Microsoft Genuine Advantage Diagnostics tool to diagnose and fix the problem.
  2. Try activating Windows over the phone.