The f8e1 error code on a Maytag washer indicates that the washer is unable to fill with water. This can be caused by a number of things, such as a clogged water inlet screen, a faulty water inlet valve, or a problem with the home's water supply.
Other common searches for this error include:
- splendide f8 e1 error code
- f8e1 maytag washer
1. Clean out the washer
- Remove the front panel of the washer.
- Remove the four screws that hold the top panel in place.
- Lift up the top panel.
- Remove the four screws that hold the washer in place.
- Remove the top panel.
- Remove the water inlet and drain hose.
- Remove the water pump.
- Remove the motor.
- Remove the screws that hold the drum in place.
- Remove the drum.
- Clean the drum and the roller bearings.
- Replace the motor, water pump, and screws that hold the top panel in place.
- Replace the top panel.
- Replace the screws that hold the front panel in place.
- Replace the front panel.
- Replace the four screws that hold the top panel in place.
- Replace the top panel.
- Replace the screws that hold the washer in place.
- Reconnect the water inlet and drain hose.
- Reinstall the top panel.
- Replace the four screws that hold the top panel in place.
- Replace the screws that hold the washer in place.
- Reconnect the water inlet and drain hose.
- Reinstall the top panel.
- Replace the screws that hold the top panel in place.
- Reinstall the front panel.
2. Check the washer's drain hose for any clogs or blockages
- Open the washer's drain hose by unthreading it from the top of the washer.
- Use a plunger to clear any objects obstructing the drain hose's flow.
- Check the drain hose for any cracks or tears. If there are any problems, replace the drain hose.
3. Inspect the washer's fill hose for any leaks or damage
- Check the washer's fill hose for any leaks.
- If there are any leaks, fix them.
- If the hose is damaged, replace it.
4. Make sure the washer is properly level
- Verify that the washer is properly plugged into an outlet and the wall.
- Check the water level indicator on the machine. If it is low, add water. If it is high, drain and refill.
- Turn off the water supply to the washer.
- Remove the front panel of the washer.
- If the leveling legs are not adjustable, adjust them so that the washer is level.
- Replace the front panel.
- Turn on the water supply to the washer.
- Check the water level indicator to ensure that it is at the proper level.
- Close the lid of the washer.
- Test the washer by loading a few items and checking the water level.
5. Check the washer's drive belt for any damage or wear
- Remove the front panel of the machine by unscrewing the four screws located at the front corners of the panel.
- Lift up the front panel and check the drive belt for any wear or damage.
- Replace the drive belt if necessary.
- Reinstall the front panel and screws.
Still not working? maybe try one of these options:
- Inspect the washer's motor for any damage or wear.
- Call a Maytag authorized service provider for further assistance.