Home > how to fix error 80710092

How do you fix error 80710092?

Published on April 9th, 2022

The error 80710092 code happens when the PlayStation Network is down for maintenance. To fix this error, you need to wait until the PlayStation Network is back up and running.

People like you are also looking for:

  • ps3 error code 80710092
  • how to fix error 80710092

1. Restart your router

  1. Power off your router.
  2. Remove the power cord from your router.
  3. Wait 30 seconds.
  4. Reconnect the power cord to your router.
  5. Wait 5 minutes.
  6. Reset your router by pressing and holding down the reset button for 10 seconds.
  7. Reinstall your firmware.
  8. Reconnect your devices to your router.

2. Flush your DNS cache

  1. Open the command prompt and type "ipconfig /flushdns"
  2. Reboot your computer if it is required.
  3. Check if the issue has been resolved.

3. Try using a different DNS server

  1. Open Control Panel > Network and Internet > Network Connections.
  2. Right-click the active network connection and select Properties.
  3. On the General tab, select the DNS server and click Change.
  4. Enter the IP address of a DNS server that is not the one that is currently configured in the computer.
  5. Click OK to save the changes.

If the answers above didn't work then you should also try:

  1. Check your DNS settings and make sure they are correct.
  2. Check your network settings and make sure the correct ports are open.
  3. Contact your ISP and make sure they are not blocking any of the relevant ports.
  4. Make sure you are not behind a firewall that is blocking the relevant ports.
  5. Temporarily disable any security software you are running.
  6. Update your PS3 firmware.
  7. Try connecting your PS3 to the internet using a wired connection.