Home > lg dishwasher ae code

How do you fix the ae code on an LG dishwasher?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

The AE error code on a LG dishwasher indicates that there is water in the base pan. This error code can be caused by a few different things, such as a leak in the dishwasher, a clogged drain, or a faulty water inlet valve. If you see this error code, you should first check for any leaks in the dishwasher. If there are no leaks, then you should check the drain for any clogs. If the drain is clear, then the water inlet valve may be faulty and will need to be replaced.

People like you are also looking for:

  • lg dishwasher error code ae
  • ae error code lg dishwasher
  • lg dishwasher ae error code
  • lg dishwasher ae error code fix
  • lg dishwasher ae code

1. Check that there is nothing blocking the dishwasher’s spray arm

  1. Remove any obstructions from the dishwasher spray arm.
  2. Check to see if the dishwasher spray arm is properly attached to the dishwasher.
  3. If there are any obstructions, remove them.
  4. Check to see if the dishwasher spray arm is properly aligned with the dishwasher’s spray arm hole.
  5. If there are any obstructions, align the dishwasher spray arm with the dishwasher’s spray arm hole.
  6. Reconnect the dishwasher spray arm to the dishwasher.
  7. Run the dishwasher.

2. Clean the dishwasher’s filters

  1. Open the dishwasher door.
  2. Remove the filters located on the top and bottom of the dishwasher.
  3. Unscrew the filter housing.
  4. Remove the filter.
  5. Wash the filter in hot water and detergent.
  6. Replace the filter housing and screw it into place.
  7. Close the dishwasher door.

3. Check the dishwasher’s water supply

  1. Check the water supply to the dishwasher by turning off the water to the dishwasher and checking the faucet to see if it is still flowing. If the water supply is not working, the dishwasher may have a broken water supply line.
  2. Check if the dishwasher has a water seal. If the dishwasher does not have a water seal, the dishwasher may not be getting enough water to operate properly.
  3. Check the dishwasher’s water valve. If the dishwasher has a water valve, it may be leaking water.
  4. Check the dishwasher’s water lines. If the dishwasher has water lines, they may be blocked.
  5. Check the dishwasher’s water pump. If the dishwasher has a water pump, it may be broken.

4. Run the dishwasher through a cycle with a dishwasher cleaner

  1. Open the dishwasher door and remove any dishes that are in the dishwasher.
  2. Open the dishwasher Cleaner cup and add enough dishwasher cleaner to cover the entire dishwasher.
  3. Close the dishwasher door and run the dishwasher on a normal cycle.
  4. Once the dishwasher is done, remove the dishwasher cleaner using a stiff brush.
  5. Wipe down the interior of the dishwasher with a dry cloth to clean any residual dishwasher cleaner.

5. Check the dishwasher’s drainage

  1. Disconnect the dishwasher hose from the dishwasher.
  2. Check for clogs and debris in the dishwasher’s drain.
  3. Clear any blockages and debris with a plunger.
  4. Reconnect the dishwasher hose.
  5. Run the dishwasher.
  6. Check the dishwasher’s drainage again.

If the answers above didn't work then you should also try:

  1. Have a professional service the dishwasher.