Home > nintendo switch error code 2137-7503

How to fix error code 2137-7503

Published on April 14th, 2022

If you're seeing error code 2137-7503 on your Nintendo Switch, it typically indicates that the console is having trouble connecting to the Internet. There are a few things you can try to resolve this issue:

  1. Restart your Nintendo Switch and your router.

  2. Make sure your Nintendo Switch is within range of your router.

  3. Check for any interference that might be causing problems for your Nintendo Switch's wireless signal, such as other wireless devices, microwaves, or walls.

  4. If you're using a public Wi-Fi network, try connecting to a different one.

  5. Change your DNS settings to 8.8.8.8.

  6. Update your router's firmware.

  7. Contact your Internet service provider for help with your connection.

If you're still seeing error code 2137-7503 after trying all of the above, it's possible that there is a problem with your Nintendo Switch itself. In this case, you'll need to contact Nintendo for further assistance.

You are here because you have a question about:

  • error code 2137-7503
  • nintendo switch error code 2137-7503

1. Check the game card for any dirt or debris and clean it off if necessary

To check for game card dirt or debris, first remove the game card from the nintendo switch. Next, use a cotton swab to clean the card surface. If dirt or debris is detected, the card must be cleaned off.

2. If the game card is inserted correctly and the problem persists, try restarting the Nintendo Switch console

  1. If the game card is inserted correctly, try restarting the Nintendo Switch console.
  2. If the problem persists, try replacing the game card.

3. If the problem continues, there may be an issue with the game card itself

  • Remove the game card from the nintendo switch.
  • Check the card connectors for any signs of damage.
  • Reattach the card if there are no signs of damage.
  • If the problem persists, contact Nintendo for assistance.

4. If the problem still persists, there may be a more serious hardware issue with the Nintendo Switch console

  1. If the problem still persists, try to reset the console by pressing and holding the power button for 10 seconds.
  2. If the problem still persists, try to start the console in safe mode by pressing and holding the power button for 10 seconds.
  3. If the problem still persists, try to repair the Nintendo Switch console by following these steps: a. Press the power button to turn on the console. b. Press and hold the home button while pressing the power button to turn off the console. c. Press and hold the power button until the console starts up. d. Enter the following code on the console: reboot system e. Press the power button to turn off the console. f. Follow the on-screen instructions to repair the console.