The Nintendo Switch Error Code 2813-0091 is a general error code that indicates a problem with the system's software. There are a number of potential causes for this error code, including a corrupt or damaged system file, a problem with the system's hardware, or a conflict between the system's software and another piece of software or hardware on the system. In most cases, the error can be fixed by restarting the system or by performing a software update.
People like you are also looking for:
- error code 2813-0091
- nintendo switch error code 2813-0091
1. Restart the Nintendo Switch
- To restart the Nintendo Switch, hold down the power button until the console powers off.
- Wait 10 seconds, then hold down the power button again and wait until the console powers on.
- Press the home button to return to the home screen.
- If the problem persists, try to reset the console by holding down the power button and the home button at the same time until the console resets. After the console restarts, try to solve the problem again.
2. Power cycle the Nintendo Switch
- Turn off the Nintendo Switch by pressing and holding the power button until the screen goes blank.
- Wait two seconds and release the power button.
- Place the Nintendo Switch in its charging dock.
- Press and hold the reset button on the Nintendo Switch for three seconds.
- Release the reset button and wait for the console to power on.
- If the Nintendo Switch does not power on, repeat steps 3-5.
- If the Nintendo Switch still does not power on, check to see if the power cord is plugged in properly. If the power cord is plugged in properly, try recharging the Nintendo Switch.
- If the Nintendo Switch still does not power on, try replacing the Nintendo Switch battery.
3. Update the Nintendo Switch firmware
To update the firmware on the Nintendo Switch, you will need to access the system's settings. From the home screen, select "System Settings." Select "System Update." Select "Yes, update." The system will update, and when it's done, you'll be prompted to restart. After the system has restarted, you'll be able to select "System Settings" again. Select "System Update." Select "Yes, update." The system will update, and when it's done, you'll be prompted to restart. After the system has restarted, you'll be able to select "System Settings" again. Select "System Update." Select "Yes, update." The system will update, and when it's done, you'll be prompted to restart. After the system has restarted, you'll be able to play games.
4. Contact Nintendo customer support
-If you are experiencing an issue with your Nintendo Switch, you can contact customer support by visiting the Nintendo website or by calling 1-800-255-3700. -Once you have reached customer support, please provide your Nintendo Switch's serial number and the error code that you are experiencing. -Customer support will then attempt to troubleshoot the issue and find a solution. Depending on the issue, they may require you to send in your Nintendo Switch for repair.