How do you fix a Panasonic microwave H98?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

The Panasonic microwave h98 is a microwave that uses an inverter to heat food. This error code happens when the inverter board fails and needs to be replaced.

You are here because you have a question about:

  • panasonic microwave error code h98
  • panasonic microwave h98

1. Check the power cord to the Panasonic microwave for any signs of damage

  1. Remove the cabinet or cover of the Panasonic microwave.
  2. Locate the power cord.
  3. Check the cord for any signs of damage.
  4. If there is damage, replace the power cord.

2. Inspect the door seal and ensure that it is clean and free of debris

To inspect the door seal on a Panasonic microwave, first remove the door by unscrewing the four screws that hold it in place. Next, remove the door seal by pulling it off of the door. Finally, clean the seal and the door with a cloth dampened with cleaning solution. Replace the door seal if it is damaged or if it is dirty.

3. Clean the interior of the microwave with a damp cloth

  1. Remove the microwave from the wall mount by unscrewing the screws on the back.
  2. Remove the glass panel in the front of the microwave.
  3. Wipe the interior surface of the microwave with a damp cloth.
  4. Replace the glass panel in the front of the microwave.
  5. Screw the microwave back onto the wall mount.

4. If the microwave is still not working, reset the unit by unplugging it from the power outlet for 30 seconds

  1. Unplug the microwave from the power outlet.
  2. Remove the cover.
  3. Locate the "Reset" button on the front panel.
  4. Push the "Reset" button to reset the microwave.

Still not working? maybe try one of these options:

  1. If the Panasonic microwave still does not work, contact customer service for further assistance.