The 25 E error code on a Samsung refrigerator indicates that the refrigerator has detected a problem with the evaporator fan motor. This error code can be caused by a variety of things, such as a failed evaporator fan motor, a blockage in the evaporator fan motor, or a problem with the evaporator fan motor control board. If the 25 E error code is displayed, it is important to check the evaporator fan motor and the evaporator fan motor control board for any signs of damage.
- Check the condenser coils for dirt and debris
- Clean the coils with a coil cleaning brush or a vacuum cleaner with a brush attachment
- Inspect the door gasket and replace it if it is damaged
- Make sure the door is closing properly and that there is no gap between the door and the fridge
- Check the temperature setting and make sure it is set to the correct setting
- If the fridge is still not cooling properly, call a Samsung customer service representative for assistance
1. Check the condenser coils for dirt and debris
Clean the condenser coils with a cloth or a vacuum cleaner. If the error code still persists, the coils may need to be replaced.
2. Clean the coils with a coil cleaning brush or a vacuum cleaner with a brush attachment
-Remove the refrigerator's door. -Remove the coils by unscrewing them. -Clean the coils with a coil cleaning brush or a vacuum cleaner with a brush attachment. -Replace the coils.
3. Inspect the door gasket and replace it if it is damaged
- Open the refrigerator door and check the door gasket for damage. If there is damage, replace the door gasket.
- Remove the screws that hold the door panel in place.
- Lift the panel off of the refrigerator.
- Inspect the door gasket for damage. If there is damage, replace the door gasket.
- Replace the door panel.
- Replace the screws that hold the panel in place.
4. Make sure the door is closing properly and that there is no gap between the door and the fridge
- Open the refrigerator door
- Check to see if the door is closing properly by putting your hand between the door and the fridge
- If there is a gap, close the door until the gap is gone
- Check to see if the door is closing properly by putting your hand between the door and the fridge again
- If there is still a gap, then the door may need to be fixed
5. Check the temperature setting and make sure it is set to the correct setting
- Open the refrigerator and locate the temperature setting on the back.
- Verify that the temperature is set to the correct setting.
- If the temperature is not set to the correct setting, adjust the temperature setting to the correct setting.
6. If the fridge is still not cooling properly, call a Samsung customer service representative for assistance
If the fridge is still not cooling properly, call a Samsung customer service representative for assistance in order to fix the error code.