The E64 error code on an Electrolux dryer indicates that the dryer is not heating up. This can be caused by a number of factors, such as a faulty heating element, a tripped circuit breaker, or a clogged vent. If the dryer is not heating up, first check the heating element for signs of damage. If the element is damaged, it will need to be replaced. If the element is not damaged, check the circuit breaker to see if it has been tripped. If the circuit breaker has been tripped, reset it and try again. If the dryer still does not heat up, it is likely that the vent is clogged. The vent should be cleaned out to ensure that the dryer can vent properly.
People like you are also looking for:
- frigidaire dryer e66 error code
- electrolux e64 error code
- electrolux error code e64
- electrolux dryer error code e64
- electrolux dryer code e64
1. Check the connection between the dryer and power source
- Verify that the power is connected to the dryer.
- If the power is not connected, connect it to the dryer and turn it on.
- If the dryer still does not start, check the power cord for breaks or damage.
- If the power cord is not the problem, check the outlet for damage.
- If the outlet is not the problem, check the wiring to the dryer.
- If the wiring is not the problem, check the dryer's fuse.
2. Clean the lint screen
- Remove the lint screen by turning it counterclockwise.
- Clean the screen with a vacuum cleaner and water.
- Reinstall the screen and turn it clockwise.
3. Check the dryer vent for blockages
- Remove the cover of the dryer.
- Locate and remove the dryer vent hose.
- Locate and remove any debris or lint blocking the dryer vent.
- Inspect the dryer vent for any blockages.
- Clean the dryer vent if necessary.
- Reconnect the dryer vent hose.
- Reinstall the cover of the dryer.
4. Clean the interior of the dryer
- Open the dryer door and remove any items inside the dryer that may have fallen onto the heating element.
- Remove the lint filter and clean it with a vacuum cleaner.
- If the heating element is dirty, use a brush to clean it.
- If the heating element is not dirty, replace it with a new one.
- Clean the interior of the dryer drum with a vacuum cleaner.
- Clean the exterior of the dryer with a hose and a scrub brush.
5. Inspect the heating element
- Look for any burnt-out light bulbs or electrical cords.
- Check the heating element for any scorching or broken wires.
- If there are any broken or scorching wires, replace the heating element.
6. Check for loose wiring
- If you are seeing the “E64” error code on your Electrolux dryer, the first step is to determine the source of the problem. This can be difficult because some wiring problems are difficult to detect. If you are able to power on the dryer, check to see if the power is going to the coils. If so, the problem may be with the wiring to the coils. If the power is not going to the coils, the problem may be with the wiring to the motor.
- If the wiring to the coils is defective, the easiest way to test it is to remove the coils and check the wiring. If the wiring is defective, the coils may not be able to provide enough power to the motor, and the “E64” error code may be displayed.
- If the wiring to the motor is defective, the dryer may not be able to start. In order to test the motor, you will need to remove the dryer cover. Once the cover is removed, you can test the motor by pressing the start button and watching for the motor to start. If the motor does not start, the wiring may be defective.
- If the wiring is not defective, but the “E64” error code is still being displayed, it may be because the thermal fuse has been blown. To test the thermal fuse, you will need to remove the cover and check the fuse. If the fuse is blown, the “E64” error code may be displayed.
Some users might also have success with the following opitons:
- Replace any damaged parts.