How to fix the Frigidaire H1 code?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

Frigidaire h1 code is an error code that indicates that the refrigerator has lost power. This can happen for a variety of reasons, including a power outage, a tripped circuit breaker, or a blown fuse. If the refrigerator is not receiving power, it will not be able to cool properly, which can cause food to spoil. Frigidaire h1 code can also indicate a problem with the refrigerator's compressor. If the compressor is not working properly, it will not be able to circulate cool air, which can cause the refrigerator to become too warm.

Users typically search for a solution by asking about:

  • frigidaire error code h1
  • h1 error code on frigidaire refrigerator
  • frigidaire h1 code

1. Check the power supply to the refrigerator

  1. Open the refrigerator door.
  2. If the power cord is plugged in, unplug it and check the power supply to the refrigerator.
  3. If the power supply to the refrigerator is not working, replace the power cord.

2. Check the control board for errors

  1. Check the temperature, fan speed, and filter status.
  2. Check for blown fuses.
  3. Reset the control board.
  4. Test the frigidaire h1 unit.

3. Check the evaporator fan for damage

  1. Open the refrigerator and remove the top shelf.
  2. Look inside the evaporator fan housing for any damage.
  3. If there is damage, replace the evaporator fan.

If the answers above didn't work then you should also try:

  1. Check the condenser fan for damage.
  2. Clean the condenser coils.
  3. Clean the evaporator coils.
  4. Replace the air filter.
  5. Replace the water filter.
  6. Reset the refrigerator.