Home > epson error 000041

How do I fix the Epson error code 000041?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

Epson error 000041 is a common error code that is caused by a problem with the printer's ink cartridges. This error code can be caused by a variety of issues, including a clogged ink cartridge, a damaged ink cartridge, or a problem with the printer's firmware. In most cases, this error code can be resolved by replacing the ink cartridges or resetting the printer's firmware.

You are here because you have a question about:

  • epson error code 00041
  • epson error 000041

1. Restart your computer and try again

  1. Open the Start menu and click on “Shutdown”.
  2. Click on the “Restart” button.
  3. After the computer restarts, press the “F5” key to refresh the boot menu.
  4. Choose “Enter Safe Mode With Networking” from the boot menu.
  5. Press the “F8” key to boot into Safe Mode With Networking.
  6. Click on the “Network Connections” icon.
  7. Right-click on the “Local Area Connection” and choose “Properties”.
  8. Under the “General” tab, click on the “Restart” button.
  9. After the computer restarts, press the “F5” key to refresh the boot menu.
  10. Choose “Enable Networking” from the boot menu and then click on the “OK” button.
  11. After the computer restarts, try to print a document.

2. Run a virus scan on your computer

To run a virus scan on your computer, follow these steps:

  1. Open your computer's “Start” menu and click “All Programs”.
  2. Click the “Accessories” category.
  3. Click the “System Tools” category.
  4. Click the “Virus Scanner” program.
  5. Click the “Scan” button to start the virus scan.
  6. When the scan is complete, click the “Close” button to close the virus scanner program.
  7. Restart your computer to finish the virus scan process.

3. Check for any loose connections

  1. Disconnect the power cord from the back of the printer.
  2. Disconnect any cables that are connected to the printer.
  3. Lift up the front of the printer.
  4. Look for any loose connections. If you find any, reattach the cables and plug the printer back in.
  5. Turn on the printer. If the problem persists, contact Epson customer service.

4. Try printing from a different computer

If you are experiencing an error such as "epson error 000041", the first step is to try printing from a different computer. If you are using a Windows-based computer, try printing from a different computer using the Windows printing service. If you are using a Macintosh-based computer, try printing from a different computer using the Mac printing service. If you are using a Linux-based computer, try printing from a different computer using the Linux printing service. If you are still experiencing the error, the next step is to try resetting your printer. Resetting your printer usually resolves the error. To reset your printer, follow the steps that are specific to your printer.

If you didn't find success with an option above, then try:

  1. Update your printer drivers.
  2. Contact Epson support.