Home

How to fix Direct TV.com ext203?

Alton Alexander
By Alton AlexanderUpdated on June 3rd, 2022

The direct tv com ext203 error code is a common error code that is caused by a problem with the communication between the Direct TV receiver and the television. This error code can be caused by a number of different things, but the most common cause is a bad connection between the two devices.

People like you are also looking for:

  • directv error code 203
  • direct tv com ext203

1. Check the coaxial cable connection to your TV

  1. Check the coaxial cable connection to your TV.
  2. If the connection is not good, replace the coaxial cable.

2. Check all of the connections between your TV and the wall outlet, including any splitters or amplifiers that you may be using

  1. Turn off your TV and any connected devices.
  2. Check to see if your TV has a power cord. If not, you'll need to find an appropriate outlet.
  3. Check to see if your TV has a HDMI connection. If not, you'll need to find an appropriate outlet and connect your TV to the outlet using an HDMI cable.
  4. Check to see if your TV has a USB connection. If not, you'll need to find an appropriate outlet and connect your TV to the outlet using a USB cable.
  5. Check to see if your TV has a optical audio connection. If not, you'll need to find an appropriate outlet and connect your TV to the outlet using an optical audio cable.
  6. Check to see if your TV has any splitters or amplifiers. If necessary, you can use splitters or amplifiers to connect your TV to the wall outlet.
  7. Turn on your TV and any connected devices.

3. Unplug and then plug back in your TV

  1. Remove the power cord from the TV.
  2. plug the TV into an outlet.
  3. Reconnect the power cord to the TV.
  4. Turn on the TV.

4. Restart your TV

  1. First, unplug your TV from the power source.
  2. Next, press and hold the power button on your TV for about five seconds.
  3. Release the power button and wait for the TV to power down.
  4. After the TV has completely powered down, press and hold the power button on your TV for about five seconds again.
  5. Release the power button and wait for the TV to power on.
  6. Once the TV has powered on, press and hold the reset button on the back of your TV for about ten seconds.
  7. Release the reset button and wait for the TV to finish resetting.
  8. Once the TV has finished resetting, press the menu button on your TV.
  9. Navigate to the settings menu and select system.
  10. Select advanced and press enter.
  11. Select reset settings and press enter.
  12. Select reboot and press enter.
  13. Your TV should now restart and be fixed.

5. Reset your TV

To reset your TV, first power it off by unplugging the power cord from the wall outlet. Wait at least five seconds before plugging the power cord back in. Then, press and hold the power button for at least seven seconds to reset the TV. After the TV has reset, plug in your cable or satellite box, and your TV should automatically turn on.

6. Check for any updates to your TV's firmware

To check for any updates to your TV's firmware, follow these steps:

  1. Go to the Settings menu on your TV.
  2. Select System.
  3. Select Firmware Update.
  4. Select Check for updates.
  5. If there are any updates available, your TV will display a message telling you how to download and install them. Follow the instructions provided.
  6. Once the updates are installed, your TV will restart and you will be able to use direct tv com ext203 channel not found.

If you didn't find success with an option above, then try:

  1. Contact your TV's manufacturer.
  2. Contact your cable or satellite provider.