Home > how to reset samsung oven

How do you reset a Samsung oven?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

If your Samsung oven is displaying an error code, there are a few things you can do to reset it. First, try unplugging the oven for a few minutes and then plugging it back in. This may clear the error code and allow you to continue using the oven. If the error code persists, you may need to open up the oven and check the wiring. Make sure all the connections are secure and there is no damage to the wires. If everything looks good, try resetting the oven by pressing and holding the "Clear/Off" button for three seconds. This should reset the oven and clear the error code. If the error code continues to appear, you may need to contact a Samsung service center for further assistance.

You are here because you have a question about:

  • samsung oven c-24 error code
  • samsung gas oven error code c-24
  • samsung gas oven c-24 error code
  • c-24 samsung oven error code
  • how to reset samsung oven

1. Turn off the oven and unplug it from the outlet

  1. Look for the knob on the front of the oven that turns it on and off.
  2. Turn the knob to the off position.
  3. Disconnect the oven cord from the outlet.
  4. Close the oven door.

2. Wait five minutes and plug the oven back in

  1. Turn off the power to the oven
  2. Wait five minutes
  3. Unplug the oven
  4. Turn on the power to the oven
  5. Open the oven door

3. Press and hold the "Clear/Off" button for three seconds

When the Samsung oven is not working as it should, it is important to take the necessary steps to reset it. To do this, first press and hold the "Clear/Off" button for three seconds. This will reset the oven and ensure that it is working properly.

4. Enter the code "1-0-0-0" followed by the "Start" button

-Press and hold the "Power" button for about 10 seconds to turn off the oven -Remove the side panel by gently pressing on the two clips that hold it in place -Remove the screws that hold the bottom panel in place -Remove the bottom panel -Locate the "Reset" button and press it -Replace the bottom panel, screws, and side panel

5. If the above steps do not work, consult the oven's manual for troubleshooting tips

-If the oven is not lighting, check that the power is on by plugging it in to an outlet. -If the oven is not heating, check that the oven is plugged in and that the power is on. -If the oven is not cooking, check that the oven is plugged in and that the power is on. -If the oven is not responding to the touchpad, try pressing and holding the power button for 10 seconds. -If the oven still does not respond, try disconnecting the power cord and plugging it back in. -If the oven still does not respond, consult the oven's manual for troubleshooting tips.