Home > samsung dryer error codes

How to fix Samsung dryer error codes?

Published on April 1st, 2022

The Samsung dryer error code is displayed when there is an error with the dryer. This can happen for a number of reasons, such as if the dryer is not properly vented, if there is a problem with the heating element, or if the dryer is not level. If the error code is displayed, it is important to troubleshoot the problem so that the dryer can be used properly.

You are here because you have a question about:

  • how to fix hc error code on samsung dryer
  • samsung dryer error code dc
  • samsung dryer error code he
  • hc error code samsung dryer
  • he error code samsung dryer
  • samsung dryer he error code
  • samsung dryer error codes

1. Check the dryer vent to make sure it is not blocked

  1. Remove the front panel of the dryer.
  2. Look for any obstructions in the dryer ducts.
  3. Clear any obstructions with a vacuum cleaner.
  4. Reinstall the front panel of the dryer.

2. Clean the lint filter

  1. Remove the lint filter by grasping it and pulling it out from the front of the dryer.
  2. Shake the lint filter material to remove any large pieces.
  3. Pour a small amount of white vinegar onto a clean cloth and place it over the lint filter.
  4. Push down on the filter material to absorb the vinegar.
  5. Replace the lint filter and gently press it into place.
  6. Turn on the dryer and wait until the dryer has finished loading the lint filter.
  7. Remove the cloth and check to see if the error codes have cleared.

3. Check the dryer drum for any foreign objects

  1. Open the front cover of the dryer.
  2. Look for any foreign objects on the drum. If you find any, remove them.
  3. Replace the dryer drum if necessary.
  4. Check the dryer for any error codes.

4. Make sure the dryer is level

There are several steps that need to be followed in order to ensure that the dryer is level in order to fix Samsung dryer error codes. The first step is to determine whether or not the dryer is off-level. This can be done by using a level or a spirit level to make sure that the dryer is level from front to back and from side to side. If the dryer is off-level, the next step is to adjust the legs of the dryer in order to make it level. This can be done by either using a screwdriver or a level to adjust the legs. If the dryer is still off-level, the next step is to adjust the height of the dryer drum. This can be done by using a screwdriver or a level to adjust the height of the dryer drum. If the dryer is still off-level, the next step is to adjust the height of the dryer vent. This can be done by either using a screwdriver or a level to adjust the height of the dryer vent. If the dryer is still off-level, the next step is to adjust the width of the dryer vent. This can be done by either using a screwdriver or a level to adjust the width of the dryer vent. If the dryer is still off-level, the next step is to adjust the tilt of the dryer. This can be done by either using a screwdriver or a level to adjust the tilt of the dryer. If the dryer is still off-level, the next step is to adjust the height of the dryer door. This can be done by either using a screwdriver or a level to adjust the height of the dryer door. If the dryer is still off-level, the next step is to adjust the alignment of the dryer drum and the dryer door. This can be done by either using a screwdriver or a level to adjust the alignment of the dryer drum and the dryer door. If the dryer is still off-level, the next step is to adjust the alignment of the dryer wheel. This can be done by either using a screwdriver or a level to adjust the alignment of the dryer wheel.

5. Reset the dryer circuit breaker

  1. Remove the front panel.
  2. Remove the screws that secure the ribbon cable to the board.
  3. Lift the cable up and disconnect it from the board.
  4. Reconnect the cable to the new board.
  5. Replace the screws that secure the ribbon cable to the board.
  6. Reinstall the front panel.

6. Replace the thermal fuse

  1. Turn off the power to the dryer.
  2. Remove the front panel.
  3. Remove the thermal fuse.
  4. Replace the thermal fuse.
  5. Reinstall the front panel.

If the answers above didn't work then you should also try:

  1. Replace the heating element.