Home > what does ue mean on samsung washer

What does UE mean on Samsung washer?

Alton Alexander
By Alton AlexanderUpdated on June 3rd, 2022

The ue error code on a Samsung washer indicates that there is an imbalance in the load of laundry. This can happen if there are too many clothes in the washer, or if the clothes are not evenly distributed. To fix this, you can redistribute the load of laundry and make sure that there are not too many clothes in the washer.

Other common searches for this error include:

  • ue error code samsung washer
  • samsung washer error code ue
  • samsung washer ue error code
  • what does ue mean on samsung washer

1. Check the manual for your specific model of Samsung washer to see if there is a setting to adjust the water level

  1. Open the Samsung washer
  2. Look for the “Water Level” control on the front of the washer.
  3. If the “Water Level” control is not available, look for the “Water Inlet” control on the front of the washer.
  4. If the “Water Level” control is not available, look for the “Water Inlet” control on the back of the washer.
  5. Turn the “Water Level” control to the desired water level.

2. If your washer has a dial or knob to adjust the water level, turn it to the lowest setting and see if that fixes the problem

If your Samsung washer has a dial or knob to adjust the water level, turn it to the lowest setting and see if that fixes the problem. If it does not, then you may need to take it to a Samsung service center to have it fixed.

3. If you have a top-loading washer, try adding a few towels to the load to balance it out and redistribute the weight

  1. Open the door of the washer.
  2. Add a few towels to the load.
  3. Close the door of the washer.
  4. Check the balance of the load.

4. If your washer is still vibrating excessively, you may need to have the washer checked by a technician to see if there is an underlying issue causing the problem

If your washer is still vibrating excessively, you may need to have the washer checked by a technician to see if there is an underlying issue causing the problem.