Home > dish on demand not working

How to Fix Dish On Demand Not Working?

Alton Alexander
By Alton AlexanderUpdated on June 3rd, 2022

When dish on demand is not working, it can be because of a few different things. First, it can be because the dishwasher is not completely full. If there is not enough water in the dishwasher, it can cause the dishwasher to overheat and not be able to properly clean the dishes. Second, the dishwasher may be dirty. If the dishes are not cleaned properly, the dishwasher will not be able to properly clean them. Finally, the dishwasher may not be compatible with the dish on demand system. If the dishwasher is not compatible with the dish on demand system, the dish on demand system may not be able to properly clean the dishes.

1. Check to see if the dish is plugged in and if it is, check to see if the power is working

  1. Check to see if the dish is plugged in to an outlet. If it is not plugged in, plug it in and check to see if the dish turns on.
  2. If the dish is plugged in, check to see if the power is working by checking the circuit breaker or fuse box. If the power is not working, reset the breaker or replace the fuse.
  3. If the dish is still not working, check to see if the on-demand feature is working by trying to access it from the menu. If the on-demand feature is not working, contact customer service for further assistance.

2. Check the dish's filter

  1. Remove the dish from the dishwasher.
  2. Check the dish's filter for any dirt or debris that may be blocking the flow of water.
  3. Clean the filter as needed and replace it if necessary.
  4. Run the dishwasher through a test cycle to see if the problem has been fixed.

3. Check to see if the dish is seated properly in the dishwasher

  1. Make sure that the dishwasher is turned off and that there is no water in the dishwasher.
  2. Remove the dish from the dishwasher.
  3. Inspect the dish to see if it is seated properly in the dishwasher.
  4. If the dish is not seated properly, re-seat the dish in the dishwasher.
  5. If the dish is still not seated properly, contact a qualified dishwasher repair technician to further inspect and repair the dishwasher.

4. Check the water temperature

To check the water temperature, you will need to:

  1. Locate the water inlet valve on the dishwasher.
  2. Turn on the water supply and let the water run into a cup or bowl.
  3. Use a food thermometer to check the temperature of the water.
  4. If the water is not hot enough, adjust the water inlet valve until the water reaches the correct temperature.

Still not working? maybe try:

  1. Check the dishwasher detergent.
  2. Check the dishwasher spray arm.
  3. Check the dishwasher drain hose.
  4. Check the dishwasher water supply.
  5. Check the dishwasher water pressure.
  6. Check the dishwasher water temperature.