The F9 code on a Whirlpool oven indicates that the oven door is not fully closed. The door must be closed completely in order for the oven to operate properly. If the door is not closed properly, the oven will not be able to maintain the proper temperature, and the food will not cook evenly. The F9 code is a safety feature that prevents the oven from operating if the door is not closed properly.
Other common searches for this error include:
- whirlpool oven f2 error code
- f2eo error code whirlpool
- whirlpool oven f1 error code
- f9 error code whirlpool oven
- whirlpool f9 code
1. Check that the dishwasher is level
- Open the dishwasher door and check the water level. If the dishwasher is low on water, add water using the faucet.
- Check the dishwasher bottom for any obstructions or objects that could be causing the dishwasher not to level. Remove any objects or obstructions.
- Align a straight edge against the dishwasher bottom and check that the dishwasher is level. If the dishwasher is not level, use a spirit level to adjust the dishwasher level.
- Close the dishwasher door and check that the dishwasher is level again.
2. Clean the dishwasher filters
- Turn off the dishwasher.
- Remove the dishwasher filters by unscrewing the retaining screws.
- Wipe the filters clean with a damp cloth.
- Replace the filters by screwing them back on to the dishwasher.
- Turn on the dishwasher and test the filters.
3. Check the water inlet valve
To check the water inlet valve in order to fix whirlpool f9 code:
- Remove the water inlet valve by unscrewing it.
- Inspect the valve for any damage. If there is damage, replace the valve.
- Make sure the valve is properly installed by reassembling the unit.
- Turn on the water supply and check for leaks.
4. Inspect the drain hose
- Open the dishwasher door.
- Check the water inlet hose for any debris or kinks.
- Inspect the drain hose for any cracks, blockages, or leaks.
- If there are any problems with the drain hose, replace it.
If you didn't find success with an option above, then try:
- Run the dishwasher through a cycle with a dishwasher cleaner. This can help remove any build-up that is causing the F9 error code.
- Contact a qualified technician if the above steps do not fix the problem.