How do I fix the Windows 10 update error code 0xc1900200?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

Windows 10 update error code 0xc1900200 happens when the computer is unable to connect to the Windows Update servers. This can be caused by a number of factors, including a poor internet connection, a firewall blocking access to the Windows Update servers, or a problem with the Windows Update servers themselves.

People like you are also looking for:

  • windows error code 0xc1900200
  • error code: 0xc1900200
  • error code oxc1900200
  • windows update error code 0xc1900200
  • windows 10 update error code 0xc1900200

1. Restart your computer and try updating again

  1. Restart your computer.
  2. Choose "Start" and then "Control Panel."
  3. Choose "System and Security."
  4. Choose "Windows Update."
  5. Choose "Check for updates."
  6. If there are updates, choose "Install updates."
  7. When the updates are done installing, choose "Finish."
  8. Restart your computer again.
  9. Choose "Start" and then "Computer."
  10. Right-click on your computer name and choose "Properties."
  11. Under "Hardware," choose "System Devices."
  12. Under "System Devices," choose "Disk drives."
  13. Choose "Windows Update" from the "View update history" list and then choose "Install updates."
  14. Choose "See also" and then "Windows Update Troubleshooter."
  15. Choose "Fix problems."
  16. Choose "Run the Windows Update Troubleshooter."
  17. Choose "Scan for updates."
  18. When the Windows Update Troubleshooter is done, choose "Finish."
  19. Restart your computer again.
  20. Choose "Start" and then "Computer."
  21. Right-click on your computer name and choose "Properties."
  22. Under "Hardware," choose "System Configuration."
  23. Under "System Configuration," choose "Boot."
  24. Under "Boot Options," choose "Safe boot."
  25. Under "Advanced Options," choose "Windows Update."
  26. Choose "Restart now."
  27. When your computer restarts, choose "Update and restart."
  28. When your computer restarts, choose "OK."
  29. When your computer restarts, choose "Install updates."
  30. When your computer restarts, choose " Finish."

2. Run the Windows Update Troubleshooter

  1. Open the Windows Update Troubleshooter by clicking on the “Start” button and typing “Windows Update Troubleshooter” in the search bar.
  2. Click on the “ Troubleshoot Problems ” button.
  3. Click on the “Windows Update” tab.
  4. Click on the “Check for updates” button.
  5. If any updates are found, click on the “Install updates” button.
  6. Click on the “Restart now” button.
  7. If the updates are not installed, click on the “Advanced options” button.
  8. Click on the “Reset” button.
  9. Click on the “Finish” button.

3. Reset the Windows Update Components

  1. Open "Control Panel" and go to "Windows Update"
  2. Click on "Advanced options"
  3. On the "Windows Update" tab, click on "Reset"
  4. In the "Reset Windows Update" window, click on "Yes" to reset all settings
  5. After the reset has been completed, click on "Close" to finish

Still not working? maybe try one of these options:

  1. Check for updates from the Windows Update Catalogue.
  2. Delete the SoftwareDistribution folder.
  3. Configure the Group Policy Settings.
  4. Download and install the updates manually.