Home > ge window air conditioner troubleshooting

How do you fix a GE window air conditioner troubleshooting?

Published on April 8th, 2022

The GE window air conditioner troubleshooting error code indicates that the unit is not receiving enough power. This can be due to a number of factors, including a blown fuse, a tripped circuit breaker, or a loose wire. If the unit is plugged into an outlet, check to make sure that the outlet is not switched off. If the outlet is switched off, flip the switch to the ON position. If the outlet is not switched off, check to see if the circuit breaker is tripped. If the circuit breaker is tripped, reset it by flipping the switch to the OFF position and then back to the ON position. If the unit is still not receiving power, check to see if there is a loose wire. If there is a loose wire, tighten it. If the unit is still not receiving power, contact a qualified electrician.

People like you are also looking for:

  • ge air conditioner error code 88
  • ge window air conditioner troubleshooting

1. Check the power

  1. Check if the power is turned on and if it is, check to see if the breaker is tripped.
  2. Check the power cord for any breaks or fraying.
  3. Check to see if the air conditioner is plugged into an outlet that is working.
  4. Check to see if the air conditioner is receiving power from the breaker box.
  5. Check to see if the air conditioner is receiving power from the main electrical panel.
  6. Check to see if the air conditioner is receiving power from the circuit breaker.
  7. Check to see if the air conditioner is receiving power from the wall outlet.
  8. Check to see if the air conditioner is on.
  9. Check to see if the air conditioner is in the cooling mode.
  10. Check to see if the air conditioner is in the heating mode.

2. Check the thermostat

  1. Open the window and locate the thermostat.
  2. Reconnect the power supply to the thermostat.
  3. Enter the desired temperature into the thermostat.
  4. Close the window.
  5. Check the temperature.
  6. If the temperature is not the desired temperature, fix the thermostat.

3. Clean the air filter

  1. Open the window to your air conditioner and remove the filter.
  2. Inspect the filter for damage. If the filter is damaged, replace it.
  3. Clean the filter with a vacuum cleaner and a clean cloth.
  4. Reinstall the filter.

Still not working? maybe try one of these options:

  1. Check the evaporator coils. If they are dirty, they won't be able to absorb heat from the air, causing the unit to work harder and not cool as effectively.
  2. Check the condenser coils. If they are dirty, they won't be able to release heat properly, causing the unit to work harder and not cool as effectively.
  3. Check the air flow. Make sure there are no obstructions blocking the air flow to and from the unit.
  4. Check for leaks. Make sure there are no leaks in the refrigerant line.