Home > samsung washer nd code

How do I fix a Samsung washer with an ND code?

Published on April 13th, 2022

The samsung washer nd code is a code that indicates that the washer is not draining properly. This error code can happen for a number of reasons, including a clogged drain, a problem with the drain pump, or a problem with the pressure switch. If the washer is not draining properly, it can cause the clothes to come out wet, or it can cause the washer to stop working altogether.

People like you are also looking for:

  • nd error code samsung washer
  • samsung washer error code nd
  • samsung washing machine error code nd
  • samsung error code nd
  • samsung washer nd code

1. Check the drain hose for blockages

-Remove the front panel of the washer -Locate the drain hose and check for any blockages -If there are any blockages, remove them using a plunger or a strainer -Replace the drain hose if necessary

2. Clean the drain pump filter

  1. Turn off the water supply to the washer.
  2. Remove the cover on the drain pump.
  3. Remove the filter.
  4. Clean the filter with a clean cloth.
  5. Replace the filter.
  6. Reinstall the cover on the drain pump.
  7. Turn on the water supply to the washer.

3. Check for foreign objects in the drain pump

  1. Open the Samsung washer and locate the drain pump.
  2. Remove the drain pump if necessary.
  3. Inspect the drain pump for any foreign objects.
  4. If foreign objects are found, remove them and replace the drain pump.

4. Clean the washer tub

  1. Remove the washer tub by unscrewing the four screws on the back.
  2. Remove the drain hose and the water inlet hose.
  3. Remove the washer drum.
  4. Remove the washer pump and the water circulation pump.
  5. Inspect the drain hose for any clogs or damage. Repair or replace the hose as necessary.
  6. Inspect the washer pump for any damage or wear. Repair or replace the pump as necessary.
  7. Inspect the water circulation pump for any damage or wear. Repair or replace the pump as necessary.
  8. Remove the water seal from the bottom of the washer tub.
  9. Remove the washer tub liner.
  10. Clean the washer tub and dry it thoroughly. Replace the washer tub liner.
  11. Reinstall the washer drum, washer pump, and water circulation pump.
  12. Replace the drain hose, water inlet hose, and screw caps.
  13. Replace the washer tub screws.

5. Replace the drain pump

  1. Remove the screws that secure the top of the washer to the cabinet.
  2. Remove the top of the washer.
  3. Remove the drain pump.
  4. Install the new drain pump.
  5. Reinstall the top of the washer.
  6. Secure the screws that secure the top of the washer to the cabinet.