How do I fix the error symbols on my baby brezza?

The Baby Brezza is a baby food maker that can steam and blend food. There are four error symbols that can appear on the device:

1. A red exclamation mark means that the water tank is empty and needs to be refilled.

2. A green light with a red exclamation mark means that the food is not blending properly and needs to be blended for longer.

3. A red light with a green exclamation mark means that the food is over-blended and needs to be blended for less time.

4. A flashing red light means that the device is overheating and needs to be turned off for a few minutes to cool down.

Users typically search for a solution by asking about:

• baby brezza e2 error code
• baby brezza e2 error code fix
• baby brezza error symbols

• Check that all components are properly assembled and tightened
• Clean the internal components with a mild soap and water solution
• Check for blockages in the internal components

1. Check that all components are properly assembled and tightened

1. Remove the cover on the back of the machine.
2. Look for any missing or broken screws.
3. Tighten all screws in the machine.
4. Replace the cover on the back of the machine.
5. Replace any missing parts.

2. Clean the internal components with a mild soap and water solution

1. Remove any obstructions from the air intake and exhaust.
2. Remove any obstructions from the fan motor.
3. Remove any obstructions from the battery.
4. Remove any obstructions from the heating element.
5. Fill a bowl with warm water and pour in a small amount of mild soap. Swirl the soap around the bowl to create a lather.
6. Plug in the baby brezza and turn it on.
7. Place the bowl of soap close to the fan motor.
8. Place the bowl of soap close to the battery.
9. Place the bowl of soap close to the heating element.
10. Turn the baby brezza off and unplug it.
11. Pour a small amount of water into the air intake and exhaust.
12. Remove any soap residue from the fan motor, battery, and heating element.
13. Reattach the fan motor, battery, and heating element.
14. Reattach the air intake and exhaust.
15. Turn the baby brezza on and check for error symbols.

3. Check for blockages in the internal components

1. Check the filters. If there are any blockages, clear them using a cloth or paper towel.
2. Check the fan and motor. If they are not functioning correctly, they will need to be replaced.
3. Check the cord. If it is frayed, damaged, or has any cracks, it will need to be replaced.

Still not working? maybe try:

1. Replace any damaged or worn components.
2. Contact Baby Brezza customer service for assistance.