How to fix a F0E9 Whirlpool Duet front load washing machine?

The f0e9 whirlpool error code indicates that there is a problem with the door lock. This error code can occur if the door is not completely closed, the door is not locked, or the door is locked but not latched. If the door is not completely closed, the error code will display and the washer will not start. If the door is not locked, the error code will display and the washer will not start. If the door is locked but not latched, the error code will display and the washer will not start.

You are here because you have a question about:

• whirlpool error code f0e9
• f0e9 whirlpool

• Check the electrical supply to the dishwasher
• Inspect the door gasket and replace it if it is damaged
• Clean the dishwasher’s filters
• Clean the dishwasher’s spray arm
• Run the dishwasher through a cycle with a dishwasher cleaner
• Check the dishwasher’s manual and reset the controls if necessary

1. Check the electrical supply to the dishwasher

1. Identify the problem by checking the power to the dishwasher.
2. Check the power cord to the dishwasher.
3. Check the power outlet.
4. Check the fuse box.
5. Check the electrical wiring.

2. Inspect the door gasket and replace it if it is damaged

1. Remove the door panel by removing the screws that hold it in place.
2. Inspect the door gasket for damage. If it is damaged, replace the gasket.
3. Replace the screws that hold the door panel in place.
4. Reinstall the door panel.

3. Clean the dishwasher’s filters

1. Open the dishwasher door.
2. Find the filters on the top of the dishwasher.
3. Remove the filters.
4. Rinse the filters with water.
5. Replace the filters.
6. Close the dishwasher door.

4. Clean the dishwasher’s spray arm

1. Open the dishwasher and remove the spray arm.
2. Clean the arm using a damp cloth.
3. Reinstall the spray arm and close the dishwasher.

5. Run the dishwasher through a cycle with a dishwasher cleaner

1. Open the dishwasher door and remove any items that will be washed.
2. Add the dishwasher cleaner to the detergent cup.
3. Close the dishwasher door and start the machine.
4. Run the dishwasher through a cycle with the cleaner.
5. Wait until the dishwasher is finished and then remove the dishwasher cleaner.

6. Check the dishwasher’s manual and reset the controls if necessary

The steps to check the dishwasher’s manual and reset the controls are as follows:

1. Open the dishwasher door.
2. Check the manual for the dishwasher model you have.
3. Reset the controls if necessary.
4. Close the dishwasher door.
5. Test the dishwasher by loading a dish and turning on the power.
6. If the dishwasher does not work, contact your dealer or a professional.

If you didn't find success with an option above, then try:

1. Call a technician to inspect and repair the dishwasher.