Home

How do I fix Nintendo Error Code 006-0811?

Alton Alexander
By Alton AlexanderUpdated on June 4th, 2022

The Nintendo error code 006-0811 is a general error code that indicates a problem with the Nintendo Switch system. There are a number of possible causes for this error code, including a corrupted system file, a hardware issue, or a problem with the game or application you are trying to use. In most cases, the error can be resolved by restarting the Nintendo Switch system. If the problem persists, you may need to perform a factory reset of the system.

You are here because you have a question about:

  • 3ds error code 001-0811
  • error code 006 0811
  • nintendo error code 001 0811
  • nintendo error code 006-0811

1. Restart the system

The steps to restart the system depend on the error code and system type. However, generally speaking, pressing the power button to turn off the system, and then waiting a few seconds for it to turn back on, should fix most issues.

2. If the error persists, try using a different Wii Remote

  1. If you are using a Wii Remote that is not the original Wii Remote that came with the system, you must first reset the Wii Remote by holding down the +Control Pad button and the A button at the same time until the Wii Remote powers off.
  2. Once the Wii Remote has been reset, you can use it to attempt to fix the error code.
  3. If the error code persists, you may need to replace your Wii Remote.

3. If the error persists, try using a different Wii Remote and re-syncing it

  1. Turn off your Wii U.
  2. Remove the battery pack.
  3. Hold down the power button until the Wii U powers off.
  4. Wait 10 seconds.
  5. Replace the battery pack.
  6. Turn on your Wii U by holding down the power button.
  7. Press the home button to start the Wii U.
  8. Press the button corresponding to your Wii Remote.
  9. If you have multiple Wii Remote buttons, press the button corresponding to the Wii Remote you want to use.
  10. If you have a Wii U Pro Controller, connect it to your Wii U.
  11. If you have a Wii Remote Plus, connect it to your Wii U.
  12. If you have a Wii Remote, connect it to your Wii U.
  13. If you have a Wii U GamePad, connect it to your Wii U.
  14. If you have a Wii U Pro Controller, connect it to your Wii U.
  15. If you have a Wii Remote Plus, connect it to your Wii U.
  16. If you have a Wii Remote, connect it to your Wii U.
  17. Press the sync button on the Wii U.
  18. If the error persists, try using a different Wii Remote and re-syncing it in order to fix nintendo error code 006-0811-01.

4. If the error persists, try using a different Wii Remote and re- syncing it with a different Sync Button

  1. If the error persists, try using a different Wii Remote and re- syncing it with a different Sync Button in order to fix nintendo error code 006-0811-40.
  2. If the error persists, try resetting the Wii U by following these steps: -Press and hold the power button until the Wii U powers off -Hold down the reset button on the back of the Wii U for about 10 seconds -Release the power button and wait until the Wii U powers on -Press the A button to enter the Wii U System Menu -Select System Settings from the main menu -Select Reset Wii U from the System Settings menu -Select Yes on the confirmation screen

5. If the error persists, try using a different Wii Remote and re- syncing it with a different Wii console

If the error persists, try using a different Wii Remote and re- syncing it with a different Wii console in order to fix nintendo error code 006-0811-01.

6. If the error persists, try using a different Wii Remote and re- syncing it with a different Wii console and different Sync Button

  1. Remove any batteries from the Wii Remote.
  2. Connect the Wii Remote to the Wii console with the cable that came with it.
  3. Push and hold the Sync Button on the Wii Remote for about 5 seconds until the Wii console begins to turn on.
  4. Release the Sync Button and wait until the Wii console has finished turning on.
  5. Disconnect the Wii Remote from the Wii console.
  6. Replace the batteries in the Wii Remote.
  7. Re-connect the Wii Remote to the Wii console with the cable that came with it.
  8. Push and hold the Sync Button on the Wii Remote for about 5 seconds until the Wii console begins to turn on.
  9. Release the Sync Button and wait until the Wii console has finished turning on.
  10. If the error persists, try using a different Wii Remote and re-syncing it with a different Wii console and different Sync Button in order to fix nintendo error code 006-0811.

Still not working? maybe try one of these options:

  1. Contact Nintendo Customer Service for further assistance.