Traeger error codes are displayed on the control panel when there is a problem with the grill. The "LER" code stands for "Low Efficiency Rating." This code indicates that the grill is not reaching the set temperature and is not heating properly. The most common cause of this error code is a dirty or clogged grill. To fix this, you will need to clean the grill and make sure that there is no blockage preventing the grill from reaching the set temperature.
Users typically search for a solution by asking about:
- traeger ler error code
- traeger grill error code ler
- traeger ler code
1. Check the grill's power supply and make sure it is plugged in correctly
- Verify that the power cord is plugged into an outlet and into the back of the grill.
- Check that the power switch is turned on.
- Check that the grill is plugged into an outlet.
- Check that the grill's power supply is working by pressing the power button and checking the grill's indicator light.
2. Check the grill's circuit breaker and make sure it has not tripped
There are a few steps that need to be followed in order to check the grill's circuit breaker and make sure it has not tripped. The first step is to check the breaker itself by flipping it open and looking for any signs of damage or tripping. If there is no damage or tripping, the next step is to check the wiring to the breaker. This can be done by disconnecting the wires from the breaker, checking them for any breaks or damage, and then reconnecting them. If there is still no sign of damage or tripping, the final step is to check the circuit breaker itself. This can be done by removing the cover and looking for any signs of damage or tripping. If all of the above steps have been followed and there is still no sign of damage or tripping, then the circuit breaker may have simply tripped and needs to be replaced.
3. Check the grill's igniter to make sure it is working properly
- Verify that the power to the grill is on.
- Verify that the igniter is properly connected to the grill's electrical system.
- Verify that the igniter is operational by lighting the grill and checking the flame.
- If the igniter is not working, replace it with a new one.
4. Clean the grill's burner tubes and make sure there is no blockage
To clean the grill's burner tubes, start by opening the grill's lid and removing the grill grates. Next, use a grill brush to scrub the burner tubes clean. Make sure to get into the tight spaces between the tubes and the grates. If there is any blockage, use a plunger to dislodge the obstruction. Finally, replace the grill grates and close the grill lid.
If you didn't find success with an option above, then try:
- Replace the grill's igniter if it is not working properly.